favicon
Search
Close this search box.

Graflex Mentor – Complete DIY Kit – On Demand

1.229,001.759,00

High quality KR-Sabers pixel stick V2

Select if DIY kit includes the Graflex Hilt

Additional information

Complete Graflex Mentor chassis DIY kit.
The chassis will be printed on-demand for this order, and shipping is normally expected 2 month after ordering.

It includes a complete chassis, with accessories and all electronic components to install it. (see list below).
It can also include a Flashgun for conversion, vintage or replica.

3 Variants available
– Metal chassis kit only
– Metal chassis kit + Flashgun KR Gen2 + WannaWanga kit*
– Metal chassis kit + Vintage (in good state) + WannaWanga kit*

*WannaWanga kits are ANH or ESB and contain Grips, Clamp item, D-ring and screws / rivets.

Notes:
– Tools to perform the conversion are not supplied.
– Weathering chemicals are not supplied.
– Heatshrink tubing are not supplied.
– This is an advanced level build, for experienced installers. By buying you acknowledge having read this page entirely.

Please read our Terms and Conditions.

Prices are displayed excluding Shipping, VAT (both calculated at checkout) or Custom Taxes.

Shipping: On demand order – will ship in approx. 2 month after ordering.

Return policy: No return accepted on this item.

Order cancelation policy: Being on-demand printing, this order cannot be canceled. Make sure to have thoroughly read everything including build instructions.


Parts included in this kit:

CHASSIS
Complete Mentor Chassis parts, including blade holder and two 3D printed crystals (can serve a template to shape real quartz).
Metal chassis kit =
4 parts in steel to be polished. 5 parts in Brass. 3 parts in bronze.
1 main chassis, 2 battery modules, and one USB charge module in high quality MJF black Nylon.
KR Deluxe Blade holder.

COMPONENTS LIST:

Electronic
– 1 x Proffieboard 3
– 1 x KR 3W 28mm Bass Speaker
– 1 x KR Shtok V3 NPXL Connector
– 1 x NPXL Connector holder + lens
– 1 x resistor for red 3mm led
– 2 x 3mm red accent LED
– 1 x 2020 pixel strips (KR 2020 strips)
– 2 x single pixel accents (KR Nano pixels)
– 1 x Shtok pixel ring
– 1 x blade holder switches brass tactile
– 1 x blade holder switches aux
– 4 x Bulgin sockets 16A (Female)
– 2 x Bulgin pins 16A (Male)
– 1 x USB charger PCB
– 2 x 18650 batteries
Other Parts
– 8 x 3mmOD 2mm thick
– 1 x 4-40 retention screw (NPX connector retention)
– 1 x 4-40 screw (Blade retention)
– 3 x 4-40 hex nuts
– 1 x 4-40 brass threaded rod (to be cut)
– 1 x brass 1.5mmOD rod (to be cut)
– 1 x set of brass and alum 4mmOD tubes (to be cut)
– 1 x brass or alum 5mmOD Tube (to be cut)
– 1 x brass or alum 1mmOD Tube (to be cut)
– 1 x brass 2mmOD Tube (to be cut)
– 1 x nickel 1mmOD rod (to be cut)
– 1 x nickel 0.5mmOD rod (helps to sand and clear the 1mmOD tube)
– 1 x set of PTFE Wires (22awg, 24awg, 28awg, 30awg)
– 1 x copper electric cable (for Arc Reactor)

Join Our Newsletter