€899,00 – €1.399,00
Please read our Terms and Conditions. Prices are displayed excluding Shipping, VAT (both calculated at checkout) or Custom Taxes. Shipping: On demand order – will ship within 2 month after ordering. Return policy: No return accepted on this item. Order cancelation policy: Being on-demand printing, this order cannot be canceled. Make sure to have thoroughly read everything including build instructions.
Parts included in this kit: CHASSIS Complete Grand Master Chassis parts, including 2 crystals. Brass chassis kit = all metal parts in Natural Brass to be weathered COMPONENTS LIST:
| Electronic |
| – 1 x ProffieBoard 3.9 |
| – 1 x OLED Screen |
| – 1 x Motor |
| – 1 x 3W 31mm Bass Speaker |
| – 1 x G-Pix Chassis Connector |
| – 1 x G-Pix Blade Connector |
| – 1 x set of resistors (2) for Blade-ID setup |
| – 3 x 2020 pixel strips |
| – 2 x G-Pix Crystal Pixels |
| – 1 x G-Pix Ring Connector |
| – 1 x High Amp Kill Switch |
| – 1 x Mill-Max pins (10 pins bar each – to be cut) |
| – 1 x Mill-Max Socket (10 sockets bar – to be cut) |
| – 2 x Battery contacts (pos and neg) |
| – 1 x set of PTFE Wires (22awg, 28awg, 30awg) |
| Other Parts |
| – 3mmOD 2mm thick magnets |
| – 2mmOD 2mm thick magnets |
| – 2mmOD 1mm thick magnets |
| – 1 x set of Black socket head M1.6 screws |
| – 1 x set of M1.6 nuts |
| – 4 x 4-40 hex nuts |
| – 1 x 4-40 brass threaded rod |
| – 2 x brass 1.5mmOD rod (approx 93mm length – to be cut) |
| – 1 x set of 4mmOD tubes (to be cut) |
| – 1 x set of copper or alum 3mmOD Tube (to be cut) |
| – 1 x set of copper or alum 1mmOD Tube (to be cut) |
| – 1 x nickel 0.5mmOD rod (helps to sand and clear the 1mmOD tube) |
| – 1 x nickel and brass 1mmOD rod (approx 100mm – to be cut) |
