€1.599,00 – €2.099,00
Several covers have been designed for this chassis, the kit comes by default with the last one designed (with open window to the OLED screen) –Â check the last 2 photos.
Please add a note if you’d prefer a closed window (meaning hide the OLED under the hood).
We have Vintage Graflex available in limited quantity – contact us for photos and a quote.
Please read our Terms and Conditions.
Prices are displayed excluding Shipping, VAT (both calculated at checkout) or Custom Taxes.
Shipping: On demand order – will ship within 2 month after ordering.
Return policy: No return accepted on this item.
Order cancelation policy: Being on-demand printing, this order cannot be canceled. Make sure to have thoroughly read everything including build instructions.
Parts included in this kit:
CHASSIS
Complete Grand Master Chassis parts, including blade holder and 2 crystals.
Brass chassis kit = all metal parts in Natural Brass to be weathered, except battery holder in Natural Copper.
Note: Want additional materials choice?
=> order the Brass chassis kit and contact us. We’ll setup a custom additional order for you.
COMPONENTS LIST:
| Electronic |
| – 1 x ProffieBoard 3.9 |
| – 1 x OLED Screen |
| – 1 x Motor |
| – 1 x 3W 28mm Bass Speaker |
| – 1 x KR Shtok V3 NPXL Connector |
| – 1 x 7/8″ NPXL Connector holder + lens |
| – 1 x set of resistors (2) for Blade-ID setup |
| – 1 x SMD resistor for red 3mm led |
| – 2 x 2020 pixel strips |
| – 4 X single pixel accents (2020) |
| – 1 X single pixel accent (5050) |
| – 1 x 3mm red accent LED |
| – 1 x High Amp Kill Switch |
| – 1 x Switches PCB |
| – 2 x blade holder switches (1 brass tactile, 1 slim profile) |
| – 2 x Battery contacts (pos and neg) |
| – 2 x Bulgin Pins 10A set (Male and Female) |
| – 6 x Bulgin Pins 1A set (Male and Female) |
| – 2 x Mill-Max pins (10 pins bar each – to be cut) |
| – 1 x Mill-Max Socket (10 sockets bar – to be cut) |
| – 1 x set of PTFE Wires (22awg, 28awg, 30awg) |
| – 1 x copper electric cable (for Arc Reactor) |
| Other Parts |
| – 10 x 3mmOD 2mm thick |
| – 34 x 2mmOD 2mm thick |
| – 30 x 2mmOD 1mm thick |
| – 1 x set of Flat Head M2 screws (2 for black emitter parts) |
| – 1 x set of Black socket head M2 screws (2 for middle chassis) |
| – 1 x set of M2 nuts (2 for middle chassis) |
| – 1 x set of Black socket head M1.6 screws (2 for back chassis) |
| – 1 x set of M1.6 nuts (2 for back chassis) |
| – 1 x 4-40 retention screw (NPX connector retention) |
| – 1 x 4-40 screw (Blade retention) |
| – 3 x 4-40 hex nuts |
| – 1 x 4-40 brass threaded rod |
| – 1 x set of 4mmOD tubes (brass approx 55mm length, aluminium approx 145mm length, copper approx 145mm lenght – to be cut) |
| – 1 x brass 2mmOD tubes (to be cut) |
| – 1 x copper or alum 1mmOD Tube (to be cut) |
| – 1 x brass 1.5mmOD rod (approx 93mm length – to be cut) |
| – 1 x nickel and brass 1mmOD rod (approx 100mm – to be cut) |
| – 1 x nickel 0.5mmOD rod (helps to sand and clear the 1mmOD tube) |
