DIY Kits – ELF Empress (2025) Master Chassis – On Demand

Complete ELF-Sabers / Korbanth Empress (2025) Master Chassis DIY kit.
The chassis will be printed on-demand for this order, and shipping is normally expected 2 month after ordering.

It includes a complete chassis, with possibility to add accessories and all electronic components to install it. (see list below).

IMPORTANT – 2 chassis are needed to build this Empress saber staff.
Please buy 2 quantity of this Master Chassis if you want the staff fully installed with Master Chassis,
or buy one master chassis and select the option to add an ECO chassis or ECO-CC Chassis for the other half of the staff.
– The ECO Chassis is the same design as the master nylon black part, but printed in black PLA
– THE ECO-CC Chassis is overall the same design as the Master Chassis, but printed in PLA black and gold, and without spinning part in the Crystal Chamber.

2 Variants available
– Metal chassis kit only
– Metal chassis kit + Electronics components and other parts

Notes:
– Tools to perform the conversion are not supplied.
– Weathering chemicals are not supplied.
– Heatshrink tubing are not supplied.
– Keepower Battery not included (can be purchased from the DIY Parts Section of the shop).
– This is a DIY kit and isn’t not delivered installed. It is an advanced level build, for experienced installers.

Please read our Terms and Conditions.

Prices are displayed excluding Shipping, VAT (both calculated at checkout) or Custom Taxes.

Shipping: On demand order – will ship in approx. 2 month after ordering.

Return policy: No return accepted on this item.

Order cancellation policy: Being on-demand printing, this order cannot be canceled. Make sure to have thoroughly read everything including build instructions.

Parts included in this kit:

CHASSIS
Complete Empress Master Chassis in brass, with PA12 Soundboard chassis and 3D printed crystals (can serve a template to shape real quartz).

COMPONENTS LIST:

• ProffieBoard 3.9
• 28mm 4ohm 3W Bass Speaker
• High Amp Kill Switch
• Battery Contacts
• Brass Tactile Switches (2.5mm x1 – duplicate Aux Switch)
• 6mm x 6mm tactile swithc x2
• MICRO MOTOR 47 RPM
• OLED screen
• G-Pix Blade Connector – Short Pins
• G-Pix 6-poles Chassis Connector – Short Pins
• G-Pix 6-poles Chassis Connector PCB
• G-Pix Crystal Pixels x2
• G-Pix Crystal Pixels Ring x3
• 3.5MM WIDTH WS2812 2020 MINI FLEXIBLE ACCENT LED STRIP – 10 LED
• 1.5MM BRASS ROD
• 3mm OD Aluminium Tube
• 3mmx2mm NeoDymium Magnets x16